SyntaxLock
Patent pending
SyntaxLock
Patent pending
Suitable for all PowerSyntax connectors. Can be fitted or removed at any time. A simple, universal accessory. Quick and easy to install
-
Now you are free to forget the keys
Now you are free to forget the keys
Forgot to take some release keys with you before heading to work? Now you can unlock your connectors with SyntaxLock. SyntaxLock is a proprietary release system for the secondary lock on PowerSyntax connectors and IP67 protection caps. A simple yet powerful add-on to your connectors, SyntaxLock combines faster, more practical unlocking with complete safety. In fact it is very easy to install and to use but, in full compliance with the international electrical regulations, unmating still needs a voluntary operation on the key. SyntaxLock is supplied as a separate accessory and can be used for the retrofit of all PowerSyntax connectors built as of 2011.
-
Aiming to the future
with an eye on the pastAiming to the future
with an eye on the pastUpgrade the equipment you already own. SyntaxLock is provided as a separate kit and can be used to retrofit every source connector, line or panel, or every IP67 protection cap produced by Syntax since 2011. There is no need to change your equipment to enjoy the improved ease of use of SyntaxLock, just install it on your own PowerSyntax SPX and SPZ connector or IP67 protection cap.
-
What is the secondary lock?
What is the secondary lock?
The secondary lock prevents unintentional disconnection under load. It is obtained through a locking pin on the drain connector which snaps into a slot on the mating source connector. It needs a release key to be unlocked (here in the picture separate key p/n SPXTKEY) but, when needed, a key can be firmly coupled with the connector for a faster and easier release: that is SyntaxLock.
CAUTION: SyntaxLock must be operated only by qualified technicians in safe and controlled work environments. Do not uncouple under load. -
A kit for every need
A kit for every need
The SyntaxLock is supplied as a universal kit to be fitted on line source or panel source connectors and on IP67 protection caps for line drain and panel drain connectors. The kit consists of a universal collar, one release key for a panel source connector, one release key for either a line source connector or a IP67 protection cap for drain connectors, one nut and bolt set.
SyntaxLock kit p/n: SPX-SYLOCK -
Tightening torque
Tightening torque
The torque applied when tightening the SyntaxLock screw must be between 0.10 Nm and 0.15 Nm.
-
-
LINE
LINE
SyntaxLock for line source connectors
SyntaxLock for line source connectors
-
The line version of SyntaxLock is fitted on our source line connectors and allows you to quickly and easily unlock them from a drain connector, panel or line, or to remove the IP67 protection caps. No need to look everywhere for the release key, everything is already in place waiting for you.
-
When do I use it?
When do I use it?
On a source connector, unlocking it from:
1. a IP67 cap
2. a mating panel drain connector -
What do I need?
What do I need?
As SyntaxLock is supplied as a universal kit, to fit it on a line source connector you will only need the universal collar, the long release key and the nut/bolt set. The remaining short key will not be used.
-
PANEL
PANEL
SyntaxLock for panel source connectors
SyntaxLock for panel source connectors
-
The panel version of SyntaxLock is fitted on our source panel connectors and allows you to swiftly and comfortably disconnect drain line connectors from them or to remove the IP67 protection caps. The key becomes part of the connector.
-
When do I use it?
When do I use it?
On a source connector, unlocking it from:
1. a IP67 cap
2. a mating line drain connector -
What do I need?
What do I need?
As SyntaxLock is supplied as a universal kit, to fit it on a panel source connector you will only need the universal collar, the short release key and the nut/bolt set. The remaining long key will not be used.
-
-
CAPS
CAPS
SyntaxLock with IP67 protection caps
SyntaxLock with IP67 protection caps
-
The cap version of SyntaxLock can be fitted on our IP67 protection caps for drain connectors, either line or panel, to allow the easiest and fastest removal. Never worry again about forgetting the key, it's already in the cap.
-
When do I use it?
When do I use it?
When unlocking the cap from:
1. a panel drain connector
2 a line drain connector -
What do I need?
What do I need?
As SyntaxLock is supplied as a universal kit, to fit it on a IP67 protective cap for drain line and panel connectors you will only need the universal collar, the long release key and the nut/bolt set. The short key will not be used.