Sleeve Adapter System for set screw contacts
The ultimate solution for 25 to 95 mm˛ cables Simple. Logical. Reliable.
Sleeve Adapter System for set screw contacts
The ultimate solution for 25 to 95 mm˛ cables Simple. Logical. Reliable.
-
Sleeve adapter
Sleeve adapter
For set screw contacts
For set screw contacts
The PowerSyntax Sleeve Adapter is a unique mechanical solution for ideal cable retention when a PowerSyntax with set screw contact is used with cable sections of 95 mm˛ or smaller. On other connectors commonly found on the market, multiple concentric sleeves are used to reduce the cable section from 150 or 120 mm˛ down to the smaller section specifically needed, with as many as 4 or 5 concentric sleeves required in case of 35 or 25 mm˛ sections. The thoughtful design and the mechanical reliability of the PowerSyntax sleeve adapter eliminates the need to use multiple concentric sleeves. On the adapter, two through holes allow set screws of a suitable length, so that the compression is directly on the sleeve/cable, with no other sleeves in between. The adapter is available in different versions, each with a housing where a single reduction sleeve of the needed size is fitted.
-
-
On set-screw contacts (up to 480amp power and 150 mm˛ cable sections), the cable is inserted into the set-screw terminal with the suitable reduction sleeve. Reduction sleeves are available for 25, 35, 50, 70 and 95 mm˛. For all sleeve sizes, the stripping length is 33 mm.
-
Cable section (class 5) 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 Recommended sleeve adapter (p/n) SPX-RED025 SPX-RED035 SPX-RED050 SPX-RED070 SPX-RED095 - - Cable strip length 33 mm 33 mm 33 mm 33 mm 33 mm 33 mm 33 mm Set screw tightening torque 12Nm 12Nm 12Nm 12Nm 12Nm 12Nm 12Nm M10 hex set screw (2pcs) allen key size 5 allen key size 5 allen key size 5 allen key size 5 allen key size 5 allen key size 5 allen key size 5 -
