The PowerSyntax Sleeve Adapter is a unique mechanical solution for ideal cable retention when a PowerSyntax with set screw contact is used with cable sections of 95 mm˛ or smaller. On other connectors commonly found on the market, multiple concentric sleeves are used to reduce the cable section from 150 or 120 mm˛ down to the smaller section specifically needed, with as many as 4 or 5 concentric sleeves required in case of 35 or 25 mm˛ sections. The thoughtful design and the mechanical reliability of the PowerSyntax sleeve adapter eliminates the need to use multiple concentric sleeves.
On the adapter, two through holes allow that set screws of a length suitable for a specific sleeve size are used, so that the compression is directly on the sleeve/cable, with no others sleeves in between. The adapter is available in different versions, each with a housing where a single reduction sleeve of the needed size is fitted.
On set-screw contacts (up to 480amp power and 150 mm˛ cable sections), the cable is inserted into the set-screw terminal with the suitable reduction sleeve. Reduction sleeves are available for 25, 35, 50, 70 and 95 mm˛. For all sleeve sizes, the stripping length is 33 mm.
|Cable section (class 5)||25 mm2||35 mm2||50 mm2||70 mm2||95 mm2||120 mm2||150 mm2|
|Recommended sleeve adapter (p/n)||SPX-RED025||SPX-RED035||SPX-RED050||SPX-RED070||SPX-RED095||-||-|
|Cable strip length||33 mm||33 mm||33 mm||33 mm||33 mm||33 mm||33 mm|
|Set screw tightening torque||12Nm||12Nm||12Nm||12Nm||12Nm||12Nm||12Nm|
|M10 hex set screw (2pcs)||allen key size 5||allen key size 5||allen key size 5||allen key size 5||allen key size 5||allen key size 5||allen key size 5|